OUR PRODUCTS
S50C-CR PLATE, S50C SHEET, S50C PLATE, STOCKIST, SUPPLIER, TRADER OF CARBON STEEL
S50C-Cr Carbon Steel for Mechanical Structural Use in JIS G4051
S50C Carbon Steel Plate Stockist, Supplier & Exporter.
S50C Carbon Steel JIS G4051 for Mechanical Structural Use.
Carbon Steels have Lower carbon content than Carbon Tool Steels, and have less strict regulations on impurities. They are used in applications that require a certain amount of strength and toughness.
Carbon steels with low carbon content offer better raw-material workability, but are susceptible to uneven quenching, so care must be taken with regard to temperature management, cooling methods, and the like.
There are many Grades under Carbon Steel some of them are mentioned below.
- Carbon Steels - S15C, S45C, S50C, S55C, and S60C
- Carbon Tool Steels - SK2, SK4, SK5, SK6, and SK7
- S50C Carbon Steel is steel grade in standard JIS G4051 :
JIS S50C Steel Grade is one steel grade material in JIS G4051, which is standard specification of carbon steels for Machine Structural use, such as Hot Rolling or Hot Forging Tool Steels.
- JIS S50C Carbon Steel Supply Range :
S50C-Cr steel is suitable for shafts studs, keys etc. and S50C Steel materials are available as rolled or normalized delivery condition as per different customer requirements. We are professional JIS S50C Machinery Steel Supplier and manufacturer. We are able to supply steel S50C Plates, Sheets, Block, square bar, or S50C round steel bar or S50C steel flat, as below range:
S50C Steel Round Bar: 8mm-1600mm
S50C Steel Cold Drawn Bar: 5mm-70mm
S50C Steel Plate: 10 mm to 200 mm Thickness, Width 1500mm – 2500 mm, Length 3000 mm – 6000 mm
- JIS S50C Carbon Steel Equivalents :
There are some other steel standards and steel grades similar and equivalent to JIS S50C Carbon Steel Grade, as shown below:
- BS EN 10083 C50E/1.1206,
- ASTM A29, 1050
- EN-8 / BS 970 080M50
- S50C Carbon Steel Properties :
Steel S50C Chemical Composition
| Standard | Grade | C | Mn | P | S | Si |
| JIS G4051 | S50C | 0.47-0.53 | 0.60-0.90 | 0.03 | 0.035 | 0.15-0.35 |
JIS S50C Steel Mechanical Properties
| TensileStrength(MPa) | Yield Strength(MPa) | Elongation Ration(%) | Reduction of areaPsi(%) | Impact meritAKV (J) | Resilient valueAKV(J/cm2) | Hardness | Annealed |
| ≥630 | ≥375 | ≥14 | ≥40 | ≥31 | ≥39 | ≤235HB | ≤207HB |
- JIS S50C Carbon Steel Hardness
- Annealed, 179-235 HB
- Tempered, 16-29 HRC
- Heat Treatment of JIS S50C Steel
JIS S50C Steel materials could be hardened by water quenching at 810-860 degree, and tempered by rapid quenching 550-650 degree
- Application of JIS S45C Carbon Steel Materials
JIS S50C grade carbon steel is widely used in machinery manufacturing, good mechanical properties of this steel.
S50C carbon steel are generally use to make mechanical parts, like spring, gear, tension bar, the roller, the axis, the load spindle etc.
| Designation | International Standard |
USA | UK | Germany | France | Russia | China | Japan |
| ISO | AISI SAE | BS | DIN | NF | ΓOCT | GB | JIS | |
| S55C | C55 | 1055 | C55 | C55 | C55 | - | 55 | S55C |
| C55E4 | C55E | C55E | C55E | |||||
| C55M2 | C50R | C50R | C50R | |||||
| S50C | C50 | 1049 | C50 | C50 | C50 | 50Γ | 50 | S50C |
| C50E4 | C50E | C50E | C50E | |||||
| C50M2 | C50R | C50R | C50R | |||||
| S45C | C45 | 1045 | C45 | C45 | C45 | 45Γ | 45 | S45C |
| C45E4 | 1046 | C45E | C45E | C45E | ||||
| C45M2 | C45R | C45R | C45R | |||||
| S35C | C35 | 1035 | C35 | C35 | C35 | 35Γ | 35 | S35C |
| C35E4 | C35E | C35E | C35E | |||||
| C35M2 | C35R | C35R | C35R | |||||
| S15C | C15E4 | 1015 | C15E | C15E | C15E | - | 15 | S15C |
| C15M2 | C15R | C15R | C15R |
Standards :
JIS G4051 Grade S50C
Equivalent standards :
| GB 3275 Grade 50 | NBN 253-06 Grade C53 | BS Grade 970-1 | UNI 5598 Grade 3CD50 | SIS 141674 Grade 1674-08 |
| GB 3522 Grade 50 | EN 10083-2 Grade C50 | MSZ 5736 Grade D51 | UNI 5598 Grade ICD50 | SIS 141674 Grade 1674-00 |
| GOST 10702 Grade 50 | EN 10083-1 Grade C50E | MSZ 5736 Grade D51K | UNI 6783 Grade Fe70-3 | SIS 141674 Grade 1674-01 |
| GOST 1050 Grade 50 | BDS 3492 Grade 55LI | MSZ 61 Grade C50 | UNI 7065 Grade C50 | SIS 141674 Grade 1674-03 |
| GOST 8479 Grade 50 | BDS 3492 Grade 55LII | MSZ 61 Grade C50E | UNI 7065 Grade C51 | JIS G4051 Grade S50C |
| GOST 1577 Grade 50 | BDS 3492 Grade 55LIII | IS 1570 Grade C50 | UNI 7845 Grade C50 | EN 10132-3 Grade C50E |
| GOST 2284 Grade 50 | BDS 5785 Grade 50 | IS 3749 Grade T50 | UNI 7847 Grade C53 | EN 10277-5 Grade C50E |
| GOST 21996 Grade 50 | CSN 412051 Grade 12051 | IS 5517 Grade C50 | UNI 7874 Grade C50 | ISO 683-18 Grade C50E4 |
| GOST 7521 Grade B-56 | SEW 550 Grade Ck50 | ISO 683-18 Grade C50 | UNI 8373 Grade 1C50 | YB/T 107 Grade SM50 |
| GOST 8531 Grade L53 | NF A36-612 Grade F70 | ISO 683-1 Grade C50 | UNI 8893 Grade C50 | GB/T 699 Grade 50 |
| AS 1442 Grade K1050 | NF A35-552 Grade XC48TS | ISO 4960 Grade CS50 | NOM B-301 Grade 1049 | GB/T 3078 Grade 50 |
| AS 1442 Grade S1050 | NF A35-552 Grade XC48HI | ISO 683-1 Grade C50E4 | NOM B-203 Grade 1050 | DIN 17212 Grade Cf53 |
| AS 1443 Grade K1050 | NF A35-552 Grade XC50 | UNI 6403 Grade C48 | NOM B-301 Grade 1050 | EURONORM 86 Grade C53 |
| AS 1443 Grade S1050 | NF A37-502 Grade C50 | UNI 7847 Grade C48 | COPANT Grade 330 | JUS C.B9.022 Grade C1633 |
| SAE J403 Grade 1050 | BS Grade 1549 | UNI 5332 Grade C50 | COPANT Grade 331 | MIL S-46059 Grade G10500 |
| SAE J412 Grade 1050 | ASTM A830 Grade 1049 | MIL S-10520 Grade 6 | JIS G3445 Grade STKM17A | GOST 10543 Grade Np-50G |
| SIS 141674 Grade 1674 | ASTM A830 Grade 1050 | MIL S-16788 Grade C5 | JIS G3445 Grade STKM17C | FEDERAL QQ-S-635 Grade C1050 |
| AMS 5085 Grade 1050 | ASTM A311 Grade 1050 | UNS Grade G10490 | JIS G3311 Grade S50CM | FEDERAL QQ-S-700 Grade C1050 |
| ASTM A29 Grade 1050 | ASTM A576 Grade 1049 | UNS Grade G10500 | JIS G4051 Grade S53C | SIS 141674 Grade 1674-04 |
| ASTM A513 Grade 1050 | ASTM A576 Grade 1050 | COPANT Grade 514 | PN 84028 Grade DW52 | SIS 141674 Grade 1674-05 |
| ASTM A510 Grade 1049 | ASTM A866 Grade 1050 | COPANT Grade 333 | PN 84032 Grade 50S | DOD F-24669/1 Grade G10500 |
| ASTM A510 Grade 1050 | ASTM A519 Grade 1050 | PN 84023 Grade R65 | STAS 880 Grade OLC50 | JUS C.B0.501 Grade PZ50 |
| ASTM A682 Grade 1050 | ASTM A108 Grade 1050 | PN 84028 Grade D50 | STAS 880 Grade OLC50X | JUS C.B2.020 Grade C1600 |
| ASTM A827 Grade 1050 | ASTM A568 Grade 1050 | PN 84028 Grade D50A | STAS 880 Grade OLC50AT | JUS C.B9.021 Grade C16301 |
| AISI 1050 | EN 10277-2 Grade C50 | STN 412051 Grade 12051 | UNE 36011 Grade C48K-1 | JUS C.B9.021 Grade C16302 |
| MIL S-16974 | EN 10250-2 Grade C50 | UNI 8551 Grade C53 |
-
Cities we Supply our S50C-CR to :
Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Mumbai, Lucknow, Coimbatore, Imphal, Mysore, Ratlam, Delhi, Kanpur, Darjeeling, Jalandhar, Nagpur, Solapur, Kolkata, Allahabad, Dehradun, Jammu, Nashik, Srinagar, Chennai, Ahmedabad, Faridabad, Jamshedpur, Bhadravati, Chattisgarh, Durgapur, Asansol, Hospet, Bellary, Visakhapatnam, Nellore, Surat, Bangalore, Chandigarh, Ghaziabad, Jhansi, Patna, Siliguri, Hyderabad, Amritsar, Noida, Kochi (Cochin), Mangalore, Indore, Vadodra, Bhubaneswar, Bikaner, Bhavnagar, Tirupur, Ankleshwar, Warangal, Agartala, Thoothukudi, Thiruvanthapuram, Jaipur, Aizawl, Guwahati, Kozhikode, Raipur, Vishakhapatnam, Jabalpur, Bhopal, Gwalior, Ludhiana, Rajahmundry, Thane, Agra, Bhubaneshwar, Gurgaon, Madurai, Rajkot, Varanasi, Bhilai, Haridwar, Meerut, Ranchi, Ahmednagar, Akola, Amravati, Aurangabad, Baramati, Beed, Bhandara, Bhiwandi, Buldhana, Chandrapur, Chimur, Dahanu, Dhule, Dindori, Erandol, Gadchiroli, Hatkanangle, Hingoli, Ichalkaranji, Jalgaon, Jalna, Karad, Khed, Yavatmal, Kolaba, Kolhapur, Kopargaon, Latur, Malegaon, Mumbai, Nagpur, Nanded, Nandurbar, Nashik, Osmanabad, Pandharpur, Parbhani, Rajapur, Ramtek, Ratnagiri, Raver, Sangli, Satara, Shirdi, Shirur, Solapur, Thane, Wardha, Washim, Andhra Pradesh, Jammu and Kashmir, Nagaland, Uttarakhand, Haryana, Lakshadweep, Arunachal Pradesh, Jharkhand, Odisha, West Bengal, Himachal Pradesh, Assam, Karnataka, Punjab, Andaman and Nicobar Islands, Puducherry, Bihar, Kerala, Rajasthan, Chandigarh, Meghalaya, Chhattisgarh, Madhya Pradesh, Sikkim, Dadar and Nagar Haveli, Mizoram, Goa, Maharashtra, Tamil Nadu, Daman and Diu, Tripura, Gujarat, Manipur, Telangana, Delhi, Uttar Pradesh in India, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela, Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore, Vishakhapatnam.
Countries we Export our S50C-CR to :
United States of America, Malaysia, UAE, Indonesia, Saudi Arabia, Iran, Qatar, India, China, United Kingdom, Singapore, Canada, Thailand, South Korea, Turkey, Philippines, Egypt, Germany, Italy, Japan, Russia, Vietnam, Australia, South Africa, Portugal, Morocco, Costa Rica, Kazakhstan, Netherlands, Mexico, Brazil, France, Spain, Taiwan, Nigeria, Bangladesh, Kuwait, Iraq, Ukraine, Poland, Jordan, Romania, Oman, Hong Kong, Venezuela, Colombia, Norway, Chile, Trinidad & Tobago, Greece, Czechia, Belgium, Sri Lanka, Cyprus, Angola, Myanmar (Burma), United Kingdom, Canada, South Korea, Thailand, Netherlands, Spain, Turkey, Australia, Mexico, Pakistan, Vietnam, Brazil, Philippines, France, Taiwan, Poland, South Africa, Russia, Nigeria, Kuwait, Norway, Romania, Egypt, Oman, Sweden, Belgium, Hong Kong, Israel, Colombia, Switzerland, Denmark, Finland, Argentina, Venezuela, Peru, Ukraine, Chile, Bangladesh, Portugal, Ireland, Austria, Algeria, Greece, Iraq, New Zealand, Slovakia, Hungary, Kazakhstan, Slovenia, Lithuania, Serbia, Sri Lanka, Bahrain, Bulgaria, Morocco, Tunisia, Croatia, Jordan, Ecuador, Trinidad & Tobago, Estonia, Azerbaijan, Ghana, Lebanon, Cyprus, Dominican Republic, Latvia, Libya, Costa Rica, Cambodia, Macedonia (FYROM), Belarus, Jamaica, Palestine, Turkmenistan, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago, Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia, India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia.